Improving the Speed of Your Ethernet Cables

A reliable internet connection is difficult to achieve without wired cables to transfer the signal physically. With a reliable setup, you can reduce latency and increase the strength of your signal.

While there may not be much room for improvement regarding your ISP and connected devices, a network of cables can make a big difference. Improving the speed of your ethernet cables will give you continuous access to digital services and prevent disconnects so you can get the most out of your internet service. 

Check the Cat Rating

One of the most significant factors regarding the speed of your ethernet cables is their Cat rating. The ethernet Cat rating refers to the category they belong to—higher numbers indicate better quality cables, so it’s good to find something in the higher range for optimal results. 

Additionally, the better the cable, the more bandwidth you’ll get from it. If you’re unsure whether ethernet MHz speed makes a difference, consider how many Mbps your ISP plan gets. Most homeowners will require at least a Cat 6a to ensure their cable can handle the load.

Terminate Your Cables

If you have an extensive ethernet network, getting the most out of it can be challenging. Using a terminal to connect your cables to a single device will make it easier to extend the network later on. Terminating your cables will ensure they’re the correct length, reducing clutter throughout the space.

Loose terminal connections can cause your ethernet cable to overheat, degrading the signal and making it more difficult to stay connected. Properly terminating is essential to getting your cables from point A to B without damaging or bending them. This approach makes it easier to maintain your network, especially if you’re considering an outdoor AP installation.

Replace Old Cables

If you’ve been using your ethernet cables for a long time, they may be ready for replacement. Furthermore, if you’re constantly losing connection or experiencing slow speeds, it may be due to an old or faulty cable. Damaged or bent cables will experience packet loss and make it more of a hassle to use the internet.

Most ethernet cables last around five years. However, it might be a good idea to upgrade them before that timeframe if your network is too slow. If you’re unsure whether your ethernet is the issue, you can purchase a cable tester to see if the signal is properly moving from one end to the other.

Get the Most Out of Your Internet Service

Poor ethernet speeds can be a real hassle, especially if you have important work to do online. Getting better quality cables will make a huge difference in your connection, without the need for significant investments.

By improving the speed of your ethernet cables, you can remove the frustration of a slow connection and get your work done on time. 

Post a Comment

0 Comments